How To Attach An Anchor To A Kayak

You may need to moor your kayak for a variety of reasons. Perhaps you discovered the sweet place while fishing and don’t want to miss a bite by fighting the current.

You can even drop anchor as you watch your kids and make sure they are safe, or you have had a long paddle and need to rest up a while and take in the surroundings of the great outdoors.

Understanding how to anchor a kayak can come in handy regardless of the situation. Using an anchor system for kayak needs to be easy and not too heavy.

Luckily, we have here in our guide, all you need to know about a kayak fishing anchor and the best ways you can add one to your kayak. By the end, you’ll have a better understanding of anchors for kayaks and how you can fit them. (Learn How to Carry a Kayak)

Understanding of Anchors for Kayaks

How Do You Put An Anchor in a Kayak?

While paddling and deciding to stop for a while, you’ll need a kayak anchor to secure your position. Kayak anchors are a handy, lightweight, and portable tool for any kayaking enthusiast. Below are some tips on the types of kayak anchor you can use to fix your position on the water.

Anchor Pole

The first one is the most basic and is an anchor pole. An anchor pole comprises a lightweight, 6-8-foot-long pole that you use in shallow water situations.

You can insert the pole into a scupper hole inside your kayak, then push it into the sand or mud beneath you. You can also push the pole into the mud or sand a short distance away from your kayak and then connect it to your kayak using a length of rope.

Drift Anchor

The second is a drift anchor, which is also known as a drift sock. It is a type of anchor that looks like a parachute attached to your kayak and slowly drifts behind you when fishing. A drift sock, which is commonly used by kayak anglers, won’t keep you still, but it will slow your speed in windy circumstances and enable you to fish a larger area while you don’t float away too quickly.

Folding Anchor

A grapnel anchor, better known as a folding anchor, features four flukes you fold open when anchoring and close when not. When carrying these kayak anchors, they are small, weigh between 2-4 pounds, and have a bag for storage. (Read About Kayaking Kids)

You will use a longer anchor line and horizontal drag along the bottom surface to use this type of anchor. The flukes can dig in and anchor themselves. To keep the anchor in a horizontal dragging position, anglers frequently add a few feet of chain between the rope and the anchor.

A splendid thing about using a folding anchor is using them with many water vessels besides a kayak.

Attaching The Anchor To Your Kayak

There is more to an anchoring method than tossing an anchor and anchor line over the side and letting it sink to the lake’s bottom. First, you need to choose which way you’ll drop anchor.

It is recommended to cast your anchor from the kayak’s bow or stern, yet to never do this from the side. If you were to do this, you could find strong winds or currents pull or push against your kayak and can tip you over as the rope pulls against the side. (Find the Best Fish Finder For Kayaks)

You can learn a few ways drift anchors connect and use folding anchors on your boat. Much of this will be based on the type of kayaker you are and how you’ll be using your anchor.

The basic way is to attach (or clip) your anchor rope to your kayak handle. You can also use a cleat fixed to your boat. If you are a recreational kayaker, these are recommended when you may anchor occasionally or just for a limited period.

How Heavy Should a Kayak Anchor Be?

An anchor for a fishing kayak should be heavy enough to hold the kayak while not adding unnecessary weight to the boat. In addition, they should be easy to retrieve. You also need to keep your anchor line out of the way when not in use.

A grapnel anchor around 3lb in weight can hold a light kayak to the bottom in calm water. However, you could need a 5 to 7 lb. grapnel anchor and a tougher anchor line when fishing in a larger kayak and deeper water.

A drag chain can sink quickly and hold you in position without snagging on rocks. If you are in shallow waters, you can use an anchor pole to hold your kayak in the wind. If you are in shallow water, then a pole of around 6 feet is enough, and it won’t take much room or add much weight to your kayak.

An anchor trolley is a good investment for kayak anglers or recreational kayakers who will frequently be anchoring. Anchor trolleys allow you to switch the end of your boat from which the anchor is cast without having to take it out of the water and recast it.

Instead, you’ll have a pulley running along the side of your kayak, making transferring the anchor from front to back much easier, and it can be quick to do so.

If you wish to add an anchor trolley system to your kayak, you’ll need some bits of hardware, yet this anchoring gear is easy to find. (Find the Best Trolling Motor For Kayak)

Anchor Trolley System for Kayak

Materials You Need for an Anchor Trolley

  • 50 feet of marine rope (para-cord can be used as a substitute)
  • Two pulleys (Choose pulleys with pad eyes as it helps them rotate easier)
  • One heavy-duty split ring (Any good hardware store will have these in stock)
  • 5 inches of copper tubing

Installation of Your Anchor Trolley System

  • Cut some 3/4–1-inch pieces of copper tubing.
  • Cut two sections of your marine rope to 1 foot long. Use a flame to melt the ends of your rope to prevent fraying.
  • Take one piece of your rope, then thread it through one of your pulleys. Next, take the rope and push it through the hole your front handle connects to. Repeat this step for the stern.
  • Now you’ll have two loops, one at the front and one to the rear, with a pulley connected to each of them.
  • Secure your split ring to one end of your 5-foot section of marine rope. Use a good knot such as the Trilene knot.
  • Take the end of your 5-foot, which doesn’t have the split ring connected, then run it through the bottom of either pulley. Next, run the end of your other pulley and down so the split ring is below. It is here where to attach your anchor.
  • Attach the loose end of the top to the split ring and tighten it as much as you can. Trim any excess cord and burn to stop frays.

How To Attach An Anchor To A Kayak